DOWNLOAD FILOSEAL+ PDF DATASHEET

The unique design of the tri-flexible foam makes positioning and separation of the cables very simple while also providing a backing for the MD+ to be applied on.

This seal is easily installed in vertical scenarios while providing the added security of insuring no loss of components down the duct.

FiloSeal+ is suitable for sealing several cables or pipes contained in one duct and also allows re-entry of the seal to add or remove cables or pipes as required.

       APPROVED FOR USE ON THE 'INTER ACCESS TELSTRA UNDERGROUND

  NETWORK' AS PER DOCUMENT TM00042A01

FEATURES
* Flexible, one component, adhesive and sealing compound in a cartridge - (310ml)
* High levels of Gas and Water tightness
* Excellent adhesion, applicable to all common building materials
* Shows Fire resistance properties
* Resistant against Water, Alkaline, Chemical agents
* Resistant to Hydrogen Sulphide / Methane and many other Gases (NedLab)

* Resistant to Termites (Mastotermes Darwiniensis) Northern Australian termites
* Resistant to Rats
* Non corrosive
* Solvent free
* Shock absorbing
* Non toxic, neutral and almost odourless
*Also suitable for limiting the EX-zones during transitions (observe chemical   resistance)
* WIMES Compliant, (3.02 clause 7.4.3.2, d & e)
* Suitable for any shaped duct / bore hole / opening
* Quick and easy installation
* A complete kit for one large duct or multiple smaller ducts
* Seals all know materials, PVC & PE sheathed cables, PILC, (HD) PE pipes
* Suitable for renovations, can be installed retrospectively
* Over 25 years of operational experience

Duct sealing system FiloSeal+ is a universal solution for sealing cables and pipes in ducts or bore holes.

FiloSeal+ is suitable for sealing several cables or pipes contained in one duct and also allows re-entry of the seal to add or remove cables or pipes as required.

When installing our duct sealing system FiloSeal+, you will protect valuables from damage which is caused by gas and water leaks.

Gas and watertight up to 1,0 bar

FiloSeal+ is very easy to apply regardless of the type of cable scenario in the cable ducts as it uses a uniquely shaped foam piece which positions neatly around the cables or pipes in the duct.

Approved for use on the

'Inter Access Telstra Underground Network' as per Document TM00042A01

After application and full curing the thixotropic MD+ forms a plastic elastomer mass with special qualities effectively sealing and bonding, while providing a high level of durability.

The Filoform duct sealing system FiloSeal+ uses our MD+ sealant which is easily applied from a skeleton gun. The high quality, one component, flexible sealant “MD+” is based on a silicon compound that cures with air (Humidity).

FiloSeal+

DOWNLOAD FILOSEAL+ PDF DATASHEET

DOWNLOAD FILOSEAL+ PDF DATA SHEET

Contact Us

ABN: 32 607 753 088